ZM-type slurry pump is a single-stage single-suction cantilever horizontal centrifugal pump, absorbed in the structure of the advantages of similar products at home and abroad designed to facilitate the installation of the pump, demolition and maintenance easy.
Pump head part: ZM slurry pump is a double pump shell structure, that is, before and after the pump casing, the front guard, the rear guard, sheath, sleeve composition. Overcurrent part of the JM3 manufacturing, before and after the pump casing made of gray cast iron or ductile iron. Pump outlet position according to need, according to the 45 ℃ interval, rotating eight different angles of installation, and can be installed according to user requirements, the front and rear impeller blades to reduce leakage, improve pump life and efficiency.
Shaft seal: Shaft seal has two types, vice impeller shaft seal and packing shaft seal. Vice impeller shaft seal with undiluted pulp, sealing long life, good sealing effect. Packing seal structure is simple, easy maintenance.
Transmission part: ZM slurry pump can be directly driven, bearing seat bearing assembly body structure, high strength, large shaft diameter, good rigidity, cantilever short, under severe conditions will not bend and vibration. Heavy duty single row tapered roller bearings are used to support the pump axial and radial load. Bearing grease lubrication. Bearing body at both ends of the bearing gland, a seal, which can effectively prevent the pulp from entering and grease leakage to ensure the safe operation of bearings. According to user requirements, the bearing drive parts used on the open, with a thin shaft lubrication, reduce the shaft temperature.